My Homepage

{11 Measures to Spray Paint Your Car such as the Professionals - Car Bodywork Paint Repair

You will be amazed to find only just how to spray on auto paint really could be simple. That really doesn't mean you can only catch a can of paint and go at it. There are a few basics you have to know. Both in the preparation and application.

Measure A:

Prepare by collecting all your items that you're likely to need. Ensure that your surrounding area is shielded against any possible over spray. Any parts which do not have to be sprayed and that may be taken away afterward do thus. For other places masking tape and cover well with paper.

Step B:

These need to be sanded with 300 grit sand paper. Additionally, it makes it possible for the spray automobile paint to stick better. It is imperative the automobile be perfectly clean.

Step C:

You will need to apply a primer. This may make sure you get an overall even layer of your colored paint plus helps the paint to stick well. The best way to spray on car paint requires a little getting used to.

Step D:

Now you're pretty well to the point where you are around able to spray the colour. You might have chosen to make use of the spray car paint which arrives in aerosol cans, or perhaps you have opted for the spray gun. In any case, make a couple of practice strokes on an object before you start together with the car. When you are ready, start the passes with the paint without hesitation. If this happens there is a significant repair job on your had. You'll probably have directions about the best way to spray auto paint utilizing spray cans or the gear.

Step E:

It is up to you whether you want to wet sand between coats of primer and colour paints. You may wish to research this alternative online, or check with someone that's familiar with how to spray on auto paint

Step F:

You're down to the finishing touches once you are completely satisfied with the shade. You will now want to apply several layers that are clear. This finished look to the car and will give alloy wheel refurb Manchester the gloss in addition to protect the finish. It's going to be up to you although likely two layers will probably be sufficient.

Step G:

Once again, you have the option of wet sanding if you would like. Again, it is advisable to request the help of individuals which are comfortable with how to spray paint an automobile. If you decide to follow this step then you definitely must wet sand with the following grits in this order. This may remove spots that might not be too light in the clear coat application.

Step H:

Now you will need to using a rubbing compound so you may use a 2000 grit to eliminate any scratches to buff the surface.

Step I:

You need to buff the surface. To do this just use a medium cut polish. Once you have done this, you need to have a glassy look that is perfect to the finish.

Step J:

As a final touch, you might want to apply a few layers of wax.